Crow Racer V2 750 mm FPV Racer Plane PNF Printed Kit

Crow Racer – The Ultimate 3D-Printed FPV Racing Plane

The Crow Racer is a high-performance 3D-printed FPV RC racing plane designed for air racing and high-speed FPV flights. With an optimized aerodynamic fuselage and a secure FPV camera mount, it delivers an immersive pilot experience while keeping your camera well-protected inside the fuselage.

Built for Speed and Performance

Supports 6S LiPo batteries, enabling extreme performance with high-powered brushless motors. It includes an FC zone for flight controllers like Matek, allowing autonomous and FPV flights, while dedicated GPS and receiver compartments provide a clean and efficient setup.

Advanced FPV & Aerodynamic Design

Compatible with Digital and Analog FPV systems. The hidden aileron horn design improves aerodynamics and simplifies maintenance. Uses 4mm carbon rods for the aileron system, ensuring smooth and precise control.

Optional Features & Customization

An optional quick-release landing gear system (same as Ranger V2) provides added safety for beginners, though it is not recommended for racing or FPV. The two-color print design allows customization by changing filament colors during printing, enhancing visibility in the air.

Easy Maintenance & Electronics Setup

Large service hatches allow quick and easy access to electronics inside the fuselage. Hatch1 serves as an FPV system mount, protecting the camera while keeping it cool during flights.

Major Improvements in the New Version

• Goodbye FPV Hatch System! Introducing the new Craycle VTX Mount and Positionable FPV Cam Mount, allowing you to mount any FPV system on the market.
• Improved Model Assembly! Parts now fit together more seamlessly, using fewer pins. The wing and other sections interlock for better durability and alignment.
• Enhanced Wing Structure! Optimized internal columns eliminate print errors while reducing weight. Wings are now lighter, stronger, and have smoother surfaces.
• Lighter Craycle Models! Although print weights remain the same, repositioned servos and carbon rods make the tail section lighter. This allows smaller batteries to balance CG and reduces flight weight by an average of 100 grams.
• Optimized Carbon Rods! Unnecessary rods have been removed, and the CF rods have been shortened for improved efficiency.
• Smoother Hinge System! Hinge slots have been improved for easier installation and smoother movement.

General Specifications

• Length: 520 mm
• Wingspan: 750 mm
• Print Weight: 223 g
• Printing Time: 16 hours @ 100 mm/s
• Flying Weight: 520 g
• Wing Area: 7.7 dm²
• Wing Loading: 67.5 g/dm²
• Airfoil: MH-24 (9.01%)
• Minimum 3D Printer Size: 150x150x150 mm
• Material:
  • Regular PLA: Body, Wings
  • PetG: Mounts, Brackets, Shafts
  • TPU: Hinges, Wheels

Package Included

• 4+ Channel Radio / FPV System
• 2205 2300KV Brushless Motor
• 6040 Propeller
• 30A ESC
• 3D Printed Model Parts – PLA
• 3D Printed Hardware – PETG (Motor mount, horn, shaft, etc.)
• Hardened Steel Landing Gear with TPU Wheels
• Carbon Rods:
  • Ø5x350 mm (1x)
  • Ø4x200 mm (2x)
• Lipo Strap
• Pushrods
• TPU Hinges & Hinge Maker Tool
• Hardware – Screws, rods, wires, etc.
• Special Gifts 🎁

Required Equipment

• 3S-6S 1000-2000mAh LiPo Battery
• 3 x 9g Servos
• CA Glue

Note: Everything else is included in the package.