Ranger V3 800 mm FPV Trainer Airframe Printed Kit 
The Ancestor of the 3D Printed Freestyle FPV Wings!
Orca V3 is a compact freestyle FPV wing built for speed, stability, and cinematic flights. Fully 3D printed with just 246 g of filament, it combines lightweight strength with high performance, reaching over 250 km/h while staying smooth and reliable in the air. Designed for analog and digital FPV systems like DJI O3 and O4, Orca V3 is perfect for pilots who want an agile, durable, and next-generation FPV experience.
📦 Included in your kit
- 3D printed body parts (PLA) – Main airframe components, ready to assemble
- 3D printed hardware (PETG) – Motor mount, control horns, and other brackets
- Flex Parts (TPU) – Hinges, straps, wheels, and other necessary flexible parts
- Carbon rods – (Ø5×350 mm) Reinforcement for wings and fuselage
- Pushrods – Steel wire rods for precise control linkage
- Hardware pack – Screws, rods, wires, and all small essentials for assembly
- Lipo strap (Velcro belt) – Secure battery mounting solution
- Craft mat – Protects your table from glue during assembly
- Nitrile gloves – Keep your hands clean and safe while working with glue
- Special gifts – Surprise extras included in every kit 🎁
General Specs
- Wingspan: 800 mm
- Length: 365 mm
- Print Weight: 246 g
- Flying Weight: 490 g
- Wing Area: 12.5 dm²
- Wing Loading: 39.2 g/dm²
- Airfoil: MH45 (9.85%)
- Material:
- Regular PLA: Body
- PetG: Electronic Brackets
- TPU: Hinges
Recommended Electronics
- Radio: 4ch+ with elevon mix
- Motor: 2205 2300KV brushless motor
- Propeller: 6045, 2 Blade
- ESC: 30A 3-4S
- Battery:
- 3S 1300 mAh LiPo
- 4S1P 18650 Li-ion pack
- Servos: 2 × 9 g
- Carbon Rods: Ø5×350 mm
- Adhesive: CA Glue
Buy a Craycle Power Pack for electronics.
🎥 FPV Ready
Designed with multiple mounting options for FPV systems, GPS, and Flight Controllers, Orca V3 is compatible with the latest digital FPV units like DJI O3 and DJI O4. This means you can enjoy smooth HD video, freestyle flights, and immersive FPV adventures anywhere.
With its aerodynamic fuselage derived from the wing profile, Orca V3 delivers excellent speed and stability.
- Stall speed: 35 km/h
- Top speed: 250+ km/h
- Flight time: up to 40 minutes on a 4S 21700 5000 mAh Li-ion pack
🛠️ Smart Cooling and Design
Orca V3 offers excellent cooling for motor and FPV systems, preventing overheating during long or aggressive flights. A second service hatch gives easy access to electronics and accessories, while a single 5×350 mm carbon rod ensures strength without adding weight.
🎯 AtomRC Hatch Compatible
Orca V3 can be upgraded with a dedicated hatch designed for the AtomRC FPV Gimbal V1. This add-on transforms your Orca into a professional FPV platform, giving you smooth and stable camera control. The hatch integrates seamlessly with the fuselage, keeps your FPV system secure, and ensures excellent airflow for reliable performance. Buy AtomRC Hatch.
Why Choose Orca V3
Orca V3 is more than just a wing. It’s a high-speed freestyle FPV platform that balances stability, endurance, and cinematic capability. With quick printing, easy assembly, and lifetime updates, it’s the perfect 3D printed FPV companion.
Take your freestyle FPV flights to the next level. Buy the Orca V3 Airframe Kit today and build your own next-generation FPV wing.
Michael Foster –
– Beautifully packaged and presented. The print quality is very good. An easy to build kit especially with the small guides that slot into the sections, 2 per section to hold them in place. To achieve a better connection I would suggest a slight overlap of the back of each section to allow a really strong seal once glued with no gaps. The hinges are perfect for the aileron to wing connections, The motor mount slots nicely into the rear fuselage. The only weak design point that I found was the front two clips that hold the battery access section to the fuselage. They are just a bit tight and in the case of two of my covers they broke off.
A lovely looking model which I shall be flying soon. Thankyou
Cemal OZCELIK (store manager) –
Thank you for your review. We are working on the Hatch Lock design…
Laszlo –
Hi,
fpv is so cool! Congratulations! What kind of vtx do you recommend for the analog hatch?
Cemal OZCELIK (store manager) –
Thanks!
You can use any analog FPV system with an analog hatch. Analog Hatch has 29mm camera holder arms. This is the difference between HD and Analog Hatches.
Hans Vogels (verified owner) –
The parts are beautifull printed. Only the parcel you use is bad. You first have to mark the parcel that are breakable parts in it and even use a stronger parcel.
Cemal OZCELIK (store manager) –
Hans, thanks for your valuable comment. We send new ones of the damaged parts. The CraycleBox was the hardest kraft box we could find in this size. Sorry for your bad experience, our plan is to repack the boxed models into a thick, corrugated carton. In this way, we aim to make CraycleBox usable for different purposes in the future. Or we work for CraycleBox V2.