Ranger V3 800 mm FPV Trainer ARF Printed Kit

Craycle Ranger V3 - Your Ultimate 3D-Printed RC Trainer

If you're looking for a versatile, high-performance 3D-printed RC airplane that grows with your skills, the Craycle Ranger V3 is designed just for you. This model is the result of continuous refinement, incorporating feedback from our passionate community of pilots and builders.

With optimized aerodynamics, improved weight distribution, and enhanced features, Ranger V3 is more adaptable than ever. Whether you're flying from land, water, or rough terrain, this aircraft is ready with Bush Wheels and optional floats to handle any environment.

Built for Every Pilot

Ranger V3 is perfect for both beginners and experienced pilots. If you're new to RC flight, its stable and forgiving flight characteristics will help you learn quickly. As you progress, its wide aileron control system allows for more advanced maneuvers, making it a great platform for skill development.

Advanced Features for the Future

• FPV-Ready: The fuselage is compatible with FPV systems like DJI or Caddx, letting you experience flight from a first-person perspective.
• Flight Controller Mounts & GPS Zone: Designed for manual and assisted flying, allowing you to integrate flight stabilization and navigation systems.
• Durable & Easy to Repair: Made from 3D-printed PLA and PETG, Ranger V3 is tough and easy to rebuild if needed—so don't be afraid to push your limits!

Learn, Build, Fly, Improve

Our goal is to make 3D-printed RC flying accessible to everyone. You don’t need prior model-building experience—just follow the step-by-step PDF guide and start flying. If you encounter any issues, share your photos and videos with us on our Facebook Group, and we’ll be happy to assist you.

Ranger V3 is not just a plane; it’s a gateway to endless FPV adventures. We can’t wait to see how you take it to the skies! 🚀

Package Included

• 3D Printed model parts "PLA"
• Hardware "PetG" (Screws, Mounts, Horns, etc.)
• FPV System and Flight Controller mounts/brackets "PetG"
• 3D-Printed landing gear and printed wheels "Tpu"
• 1mm Steel Wire Pushrods
• TPU hinges and Hinge Maker tool
• Metal Weights for CG Balance
• Some special gifts

General Specifications

• Length: 600 mm (23.6 inches)
• Wingspan: 800 mm (31.5 inches)
• Print Weight: 309 g (10.9 oz)
• Flying Weight: 570 g (20.11 oz)
• Wing Area: 11.8 dm²
• Wing Loading: 48.3 g/dm²
• Airfoil: NACA 2412
• Material:
  • Regular PLA: Body, Wings
  • PetG: Mounts, Brackets, Shafts
  • TPU: Hinges, Wheels

Recommended Setup

• Motor: 2204/5/6 1500/2500 kv
• Propeller: 5” - 2/3/4 Blade
• ESC: 15-30A
• Servo: 4 x 9 g
• Battery: 2S-4S 850-2200 mAh
• 4+ Channels Radio System
• Analog/Digital FPV systems

Buy Ranger Power Pack for electronics.