$ 0,00

No products in the cart.

$ 0,00

No products in the cart.

Crow Racer Released!

We’ve added a racing model to our model library! Plug and play compatible with “Dji FPV Air Unit”, “Caddx Vista” and “Analog FPV” systems. Developed for a real racing experience so camera transmitting the view from the pilot’s eye, it is also very securely protected.

Crow Racer supports lipo up to 6s 2500 mah by it’s huge loading space which is provides long range FPV flights. The FC zone is prepared for Matek and other flight controller systems. You can use it on your autonomous flights. You can also place your GPS and Receiver modules into the right and left inside of the wing.

There is quickl release landing gear system as an option. It’s exacly the same with Ranger Mini’s landing gear. We don’t recommend to use landing gear for FPV and Racing but if you are a beginner, you can use it becouse of easy to landing and safety.

Crow has been made two color printing design so you can paint your model by changing your filament for each part and you can make your combination for your own Crow Racer. It’s also provides model visible in the air. This is so important for successfull flights!


  • Two Color printing design!
  • Common Slicer Setting Profile
  • Support-free Printing
  • Continuous Printing
  • Extra Stronge Wing and Fuselage
  • DJI – Vista and Analog FPV Hatches
  • FPV system cooling
  • 750mm Wingspan
  • MH-24 9.01% Airfoil
  • Second Service Hatch for Servos
  • Quick Release landing gear
  • Motor cooling inlets
  • Hidden aileron horns


Beta V2 (7.12.2021)
Carbon rod slots have been enlarged,
Added centering slots between fs1-fs2,
Improved DJI Air unit connectivity,
Queue slots improved,
fs2 printing errors fixed,
STL Positions have been adjusted.

Beta V3 (25.01.2022)
Tail surfaces are scaled up.
fs1_nose printing has been improved.
fs4 printing has been improved .
Landing Gear mounting has been strengthened.
Tail control horn sticking surface has been strengthened.
Wheels has been scaled down for clear operation.
Fuselage carbon rod holes has been scaled down.
Motor mounting screw holes has been scaled up.
Added inserts on the winglets and wingtips.
Tail hinge holes has been scaled up.
Battery holder has been strengthened.
The under fuselage has been strengthened.
Hatch mounting has been strengthened.
Added Caddx Vista Hatch stl files.
Added Analog FPV Hatch stl files.
DJI Air Hatch printing has been improved.
Hatch locks has been improved.
2 type of spinner design completed.
Decal design has been done.
Anti-slip surface added for hand launching.
Aileron-carbon rod bonding has been improved,
and minor improvements that don’t require typing…

Released Model! (11.04.2022)
Defined new CG Point.
Slicer profile made common.
Main Carbon Rod made Ø5X500 mm.
Model printing has been improved.
Added insert for wing-body connection.
The model has been made lighter/stronger.

Recommended Electronics:

-2207 2750Kv Brushless Motor – https://amzn.to/3rmhDO7

-30A ESC – https://amzn.to/34BFXD1

-6×2 Propeller – https://amzn.to/3JGX1Xg

-4s 1500 mAh Lipo – https://amzn.to/3KL9Dh8

-9gram MG Servo – https://amzn.to/37SKK4N

-Transmitter and Receiver – https://amzn.to/3ourRuu

Required Tools and Accessories:

-Caddx Air Unit FPV Kit – https://amzn.to/3KIq8dP

-Caddx Polar Vista FPV Kit – https://amzn.to/3M6FKs8

-Caddx Peanut Action Camera – https://amzn.to/3Ei162P

-Push Roads and Connectors – https://amzn.to/3jGxYc0

-Non-Slip Battery Starps – https://amzn.to/3KMj9AA

-eSUN PLA+ Filament – https://amzn.to/3jCfoC7

Click for download DJI Air Unit Hatch
Click for download Caddx Vista Hatch

3D Printing Settings:

Please follow the instructions in the PDF User Guide.
0,4 nozzle
0,2 Layer Height
No Support
Heated Bed
Minimum 150x150x150 mm Bed Size

Featured Articles

Related Articles