CraycleCub Released!

CraycleCub is our first Super Scale Pa-18 Piper Cub RC Plane designed for real flight experience by the “Pilot View FPV” setup. CraycleCub flies super stable and slow even if printed with Regular PLA and you don’t need any carbon rod to build this plane so, If you are a beginner on FPV and RC Planes, this model is also for you.

You can print this model with LW-PLA to make a park flyer.

CraycleCub has VTX cooling vents for the DJI Air Unit, Caddx Vista, and Analog FPV systems and it’s also like a real Pa-18 Piper Cub, it has extra motor cooling vents into the side of the fuselage.

FEATURES:

• Super Scale Pa-18 Piper Cub
• Common Slicer Profile with All Craycle Models
• Support-free Printing
• Continuous Printing
• Strong Wing and Fuselage
• Carbon Rod Free Design
• DJI Air Unit, Caddx Vista, and Analog FPV Hatches
• FPV System Cooling Vents
• Special Motor Cooling Design
• 800mm Wingspan
• About 450 gram Flight Weight
• Second Service Hatch for Tail Servos
• New 3D Printed Spring Lock Design for Hatches
• Quick Release Landing Gear System (Common with Range Mini and Crow Racer)
• Bracket Free Servo Mounting
• Short Push Rods
• TPU Wheels and Hinges
• LW-PLA Compatible

Recommended Electronics:

• 2204/05/06 2300Kv Brushless Motor / Amazon |
• 15-25A ESC / Amazon |
• 5/6/7″ Propeller / Amazon 5×3 – 5×2 |
• 2s – 3s 800-1500 mAh Lipo / Amazon | 
• 4 X 9 gram Servo / Amazon | 
• Minimum 4ch Transmitter and Receiver / Amazon |
• Any FPV System if you like to use / Amazon | 

Required Tools and Accessories:

• Caddx Air Unit FPV Kit – https://amzn.to/3KIq8dP
• Caddx Polar Vista FPV Kit – https://amzn.to/3M6FKs8
• Caddx Peanut Action Camera – https://amzn.to/3Ei162P
• Push Roads and Connectors – https://amzn.to/3jGxYc0
• Non-Slip Battery Straps – https://amzn.to/3KMj9AA
• eSUN PLA+ Filament – https://amzn.to/3jCfoC7

Click to download Analog FPV Hatch
Click to download Caddx Vista Hatch
Click to download DJI Air Unit Hatch

3D Printing Settings:

Please follow the instructions in the PDF User Guide.
0,4 nozzle
0,2 Layer Height
No Support
PLA/PETG/Nylon/LW-PLA
Heated Bed
Minimum 180*180*180 mm Bed Size

Product Page

Updates:
V1.2 Release Notes