3D Printed RC Plane | FPV ORCA

3D printed RC plane FPV Orca is our first design and first experience about RC model printing. We have optimized for normal PLA and PetG but you can print with LW-PLA to fly slow also you can print this model with any printer who has a 190*190*190 mm printing area size at home. This plane can fly long time with up to 2200 mAh battery. Also you can put your flight controller, GPS or telemetry module. We have designed for fpv, freestyle and racing flight this model.

General Specs:

Length : 340 mm
Wingspan : 780 mm
Print Weight : 200-220 gram
Flying Weight : 450-500 gram
Wing Area : 12.3 dm2
Wing Loading : 40g/dm2

With Normal PLA:

-200 gram print weight
-450-500 gram flight weight

Recommended Electronics:

• 2205 2300Kv Brushless Motor /  Amazon
• 30A ESC / Amazon
• 6×2 Propeller / Amazon Amazon
• 3-4s 1000-2200 mAh Lipo / Amazon
• 2 X 9gram Servo / Amazon
• Minimum 3ch Transmitter and Receiver / Amazon
• Any FPV System / Amazon

FPV Orca has a big loading space, easy printing (support free) and quick assembling process. 35-40 hours printing time and 30-40 minute assembling time.

All you need to make this model is a CA glue, 5 mm carbon rod and 2 pieces between 1 and 1.5 mm daimeter push rods.

It can fly so fast and acrobatic so you can use it as a Racer, FPV and Freestyle Model.

Click for the Product Page

Download Included:
-STL Files.
-Cura Profile.
-Ready to print G-code files.
-User Guide (Detailed for assembling and printing).
-Tech support.