Craycle Propeller Spinner V4 is the first Screw Free 3D Printed Spinner design in the market. We developed this model for our models and we want to bring the variations in a product so you can reach all updated versions and different sizes comfortably.
The Craycle spinner is lightweight, efficient, and very strong. With its screw-free design, there are no vibrations anymore. It's simple to assemble, you just need to put the base part onto the motor shaft after the propeller. Then you can tighten the motor nut onto the motor shaft and install the cap.
V2 and V3 are similar but there is a lot of improvement in the printing and connection design but Spinner V4 is stronger, balanced, and easy to print. Also, V4 has a symmetric design so there are no CW and CCW directions anymore. Therefore there is also no pusher and puller motor directions confusion as well.
We have 3-blade and multi-blade spinner options with a V4 design!
You can use this spinner in your own RC models as well. We would like to get your views and suggestions about the latest SF Propeller Spinner V4 design in the Review Section.
What's the news on V4?
There are many improvements with Spinner V4. The most important of these is that there are no longer separate spinners for CW or CCW direction. The two directions were commonised. Spinner pressure has been improved and assembly has been made easier. Here are the major improvements:
- There are no CW or CCW rotations anymore
- Multi-blade and 3-blade propeller spinner options are added for all sizes.
- Spinners more balanced
- Cap threads are better
- Slicer settings are made common
- Ready to Print G-code files for all options! (Compatible with Autolevel or Manual Printers)
- Technical Support
- Cura Profile
- Screw Free Spinner V4 2 Blade 5x25 mm
- Screw Free Spinner V4 3 Blade 5x25 mm
- Screw Free Spinner V4 Multi Blade 5x25 mm
- Screw Free Spinner V4 2 Blade 5x35 mm
- Screw Free Spinner V4 3 Blade 5x35 mm
- Screw Free Spinner V4 Multi Blade 5x35 mm
- Screw Free Spinner V4 2 Blade 5x40 mm
- Screw Free Spinner V4 3 Blade 5x40 mm
- Screw Free Spinner V4 Multi Blade 5x40 mm
- *Screw Free Spinner V4 2 Blade 6x45 mm (01.06.2023)
- *Screw Free Spinner V4 3 Blade 6x45 mm (01.06.2023)
- *Screw Free Spinner V4 Multi Blade 6x45 mm (01.06.2023)
Note: More sizes will be added in the future and you will be able to download them...
3D Printing Settingss
Regular PLA, PETG, ABS, NYLON and etc.
Detailed Settings (The table is included in the files.);
Ultimaker Cura Slicer is recommended! Click for download craycle.curaprofile